User Guide
11
Programming the MP2
Screen Indicators
**STORED** will appear on the screen to conrm entry accepted.
T indicates a timed process.
M indicates a manual process.
© Copyright 2007, Maxitrol Company. All Rights Reserved.
Programming Buttons
Button 1
Momentary
Switch
Program
Up/Down
Arrows
Enter
Press once to initially enter programming mode.
Press once during programming to return to the
previous screen.
Press, hold for 5 seconds and release to EXIT
programming mode.
Press either to scroll or advance through menus.
Press either to change current value.
Press once to enter into the selected menu or
programming mode.
Press once to store programmed setting.
Press and release once to switch to the next
Process or to move the controller from the
“READY” position to the First Process.
Press twice or hold for 10 seconds to
abort a timed process.
Spray