User manual

ZTE MF60 Personal Hotspot (MiFi) User Instructions
3
9. You should now be connected to the internet and be able to browse to web sites.
10. In this mode it is still possible for other computer users to use the WiFi of the device following the ‘Set Up a
WiFi Connection’ instructions
Creating a Connection Profile
If the MiFi will not connect to the internet and the status never changes to Connected, then you may need to setup a
connection profile to connect to the internet, using specific settings provided by network of the SIM card being used.
1. With the Mifi connected either using Wifi or Wired methods, log into the admin console by browsing to
http://192.168.0.1 or http://ufi.home, as per Picture 1.
2. Default password is admin
3. Navigate to Settings > APN Setting
4. From the APN Setting field choose Manual APN
5. Click the Add button (bottom right corner – you may need to scroll down)
6. Start entering the following details:
a. Profile Selection: Add New
b. Profile Name: xxxxxx
c. APN: xxxxxx
d. DNS: xxxxxx
e. Authentication: xxxxxx
f. Username: xxxxxx
g. Password: xxxxxx
h. Click Set Default button to save and set as the default profile. If you click Save first, click Set
Default afterwards.
7. Power off the device and power it up again and the device should auto connect to the internet
8. See below Picture 2 for further details.
PICTURE 2.