User manual

ZTE MF60 Personal Hotspot (MiFi) User Instructions
2
Note: The steps to connect to a WiFi network vary depending on your
operating system and whether you use the native application or third-party software.
6. Enter the WiFi key when requested. (case sensitive)
7. When successfully connected a number will appear next to the WiFi symbol (top right corner of the screen)
to indicate one client is connected. This number will increment by 1 with the number or connected clients.
Please note that if you are roaming the MiFi may not always connect automatically to the mobile network.
To connect, you need to browse to the admin console web interface of the device, by typing in
http://ufi.home or IP http://192.168.0.1 in a web browser.
PICTURE 1.
To change any settings the default login password is admin.
Setup a Wired Connection
This section contains information on installing the software, configuring your new profile, and
connecting to the internet.
Install the Software:
1. Turn on your computer and close all open applications.
2. Power on the MiFi in the normal way using the power button and wait for the LED screen to appear and
the mobile network name to appear across the middle.
3. Use the micro USB cable to attach MiFi to a USB port on your computer.
4. Wait for drivers to install and the installation wizard to automatically appear.
5. If the installation wizard does not open automatically it may need to be opened manually. Go to My
Computer and you should find a new CD drive has been created, called Mobile Hotspot. Navigate into the
CD drive icon and find and run the AutoRun.exe file
6. When the installation wizard starts, follow the on screen prompts to complete the installation.
7. Once the installation has completed it is advisable to restart your computer.
8. Once restarted, ensure the MiFi is still plugged in to your computer and that the connection status on the
LED screen of the MiFi is showing as Connected. If status is not showing Connected, go to section ‘Creating
a Connection Profile’