User Manual

4
model no. 054-1349-8 | contact us 1-888-670-6682
5
TM
SAFETY INSTRUCTIONS
MOTOR 18V DC
KEYLESS CHUCK 1/2” METAL, single-sleeve
VARIABLE SPEED RANGES 0–450 / 0–1550 RPM (no load)
TORQUE CLUTCH POSITION 16 including drilling mode
MAX. TORQUE 450 in-lb
ON BOARD WORK LIGHT LED
BATTERY 20V max* (2.0 Ah) lithium-ion
COMPATIBLE MAXIMUM BATTERY 054-3203-2; 054-3206-6
CHARGER 35-minute, diagnostic
COMPATIBLE MAXIMUM CHARGER 054-3204-0
OPTIMUM CHARGING
TEMPERATURE
50 to 86°F (10 to 30°C)
DIMENSIONS 7 1/4 x 7 5/8 x 2 11/16” (184 x 193 x 68 mm)
WEIGHT 2 lb 11 oz (1.22 kg) without battery
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
TECHNICAL SPECIFICATIONS
• Beforeoperatingthistool,carefullyreadthis
Instruction Manual and all of the labels affixed to the
tool. Failure to follow all warnings and instructions may
result in electric shock, fire and/or serious injury.
• Theterm“powertool”inthewarningsrefersto
your main operated (corded) power tool or battery
operated (cordless) power tool.
• Saveallwarningsandinstructionsforfuturereference.
TECHNICAL SPECIFICATIONS
WARNING!
• Beforeoperatingthistool,carefullyreadthis
Instruction Manual and all of the labels affixed to the
tool. Failure to follow all warnings and instructions may
result in electric shock, fire and/or serious injury.
• Theterm“powertool”inthewarningsrefersto
your main operated (corded) power tool or battery
operated (cordless) power tool.
• Saveallwarningsandinstructionsforfuturereference.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents. Rags,
clothes, cords, strings and similar items should never be left around the work area.
• Donotoperatepowertoolsinexplosiveenvironments,suchasinthepresence
offlammableliquids,gases,ordust. Power tools create sparks, which may ignite
dust or fumes.
• Keepchildrenandbystandersawaywhileoperatingapowertool.Distractions
can cause the operator to lose control.
ELECTRICAL SAFETY
• Powertoolplugsmustmatchtheoutlet.Nevermodifythepluginanyway.Do
notuseanyadaptorplugswithgroundedpowertools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoidbodycontactwithgroundedsurfacessuchaspipes,radiators,ranges
andrefrigerators. There is an increased risk of electric shock if your body is grounded.
• Donotexposepowertoolstorainorwetconditions.Water entering a power tool
will increase the risk of electric shock.
• Donotabusethecord.Neverusethecordforcarrying,pullingorunplugging
thepowertool.Keepthecordawayfromheat,oil,sharpedgesormovingparts.
Replace damaged cords immediately. Damaged or tangled cords increase the risk of
electric shock.
• Whenoperatingapowertooloutdoors,useanextensioncordsuitablefor
outdooruse. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• Ifoperatingapowertoolinadamplocationisunavoidable,usearesidual
currentdevice(RCD)orgroundfaultcircuitinterrupter(GFCI)protectedsupply.
Use of an RCD or GFCI reduces the risk of electric shock.
PERSONAL SAFETY
• Stayalert,watchwhatyouaredoingandusecommonsensewhenoperatinga
powertool.DONOTuseapowertoolwhileyouaretiredorundertheinfluence
ofdrugs,alcoholormedication.A moment of inattention while operating power
tools may result in serious personal injury.