Instruction manual
EN
7.3.2.3. Terminal denomination, description and characteristics.
Description Characteristics
Cable Section
Motorisation
Module
Output
Contacts
ATy
(No Fault powered and ready to changeover)
ATS Output
Contact
(No Fault,
!*9
Contact
Included with
'@@@5'@@
Optional for
3@@<?@@
ATS Power
supply Input I
Source
ATS Power
supply Input II
Source
Motorisation
Module
Control Inputs
ATS Module
Control Inputs
To be used with
dry contacts fed
CAUTION
Do not connect terminals 312 to 317, 413 to 417 to any power supply. These
order inputs are powered through terminal 317 (or 417 respectively) and external
dry contacts ONLY.