User manual
9Maximum C 901 CX
8. Moving and editing of channel lists
Itcanbeanideatomovechannelssothattheyareeasytond.
To move and edit channels around, press MENU to enter the menu. Highlight channels and press OK.
Then highlight EditbyusingPR-PR-and PR+, then press OK.
Inthemainlistyouhavethefollowingpossibilities:
Erasing channels:Highlightthechannelyouwishtoerase,thenpressGREEN. A message will be
shown on the screen. If the channel should be erased press GREEN. If this was a mistake, press
RED.Ifyouremoveachannelfromthemainlistyoualsoremoveitfromeveryotherlist.
Change the name of the program list:IfyoupressYELLOWyoucanchangethenameofthepro-
gram list.
• StartUp List
This is the channel list the receiver should start on if the
receiver has been turned off. Press OK to choose the
channellistyouwouldlikethereceivertostarton.
With PR-PR-and PR+youcanhighlightthelist,then
press OKtoconrmyourchoice.
• FAV1 is the name of Favourite list 1.
• FAV2 is the name of Favourite list 2 .
• FAV3 is the name of Favourite list 3.
• FAV4 is the name of Favourite list 4.
Tochangethenameofthefavouritelist,pleasereadchapter“Thetypeinbox”.PressGREEN to save
the settings, and RED to come back to the previous menu.
Tochangeanoperatorlistorafavouritelist,thelisthastobechosenrst.DothisbypressingFAV.
Everytimeyoupress,thenextlistwillbeused.Youcanseewhichlistisactiveinthebottomlefthand
corner. To change the order in which the list is presented, highlight the channel that is to be moved
with PR-PR-and PR+. Press RED and the channel will change colour
togrey.Highlightthechannel,whereyouwouldliketomovethechosen
channel to and press RED again.
Thechannelwillnowbeplacedwhereyouhighlighted.
Edit channel name and channel data:
Tochangeachannelnameandchanneldata,highlightthechannelyou
wish to change, and press OK.
Name=Thechannelname.NB!Thisnamewillcomebackifyousearchfornewchannels.
Frequency=Thefrequencythechannelsendson,thisshouldnotbechanged.
Adult lock=Crossthisboxifyouwouldlikethechanneltobelockedbyacode.
Service ID, VID/PCR/AUD =Theseareonlyusedonspecialchannels.Thisrequirestheusertotype
these in.
Quality=Thequalityofthesignalthatthereceiverreceives.Thisshouldbeashighaspossible.
Ifyouchangeanyofthese,pressGREEN to save the changes. To cancel the changes press RED.