User manual

12 Maximum C 901 CX
12. Access control
The access control menu shows all relevant information on the smart card.
A further function in the access control menu is the Adult Lock. This can lock channels that
all users should not have access to.
To do this press MENU. Use PR+and PR-PR-to highlight Access Control and press OK.
TherstmenuwillonlybeshownifthereisaCanalDigitalcardinthesmartcardslot.
Highlight Adult Lock with PR-PR-and press OK.BypressingOK
again and PR-PR-youcanactivatetheAdultlock.
Afterthis,youmusttypeinafourdigitcode.Typeinthesame
code again in the next box.
Press GREEN to save the settings or RED to cancel the settings.
To activate the Adult Lock, the receiver has to be turned off and
on again.
TheMenuwillnowbelocked,andcanonlybeopenedwiththefourdigitcode.Ifyouhave
forgottenthecode,contactyourdealerwhocanhelptoopenthereceiveragain.
NB! Every channel that is locked can only be opened with the four digit code.
13. The type-in box
Thereareanumberofplacesinthemenus,whereyouwillbeaskedtotypeininformation.A
type-inboxcandothis.Thetype-inboxwillautomaticallyappearifyoucantypeinanything.
Use PR+and PR-PR-to move the cursor up and down,
-
and
+
will move the cursor left
or right. When the cursor is on the right letter, press OK.
With GREEN and REDyoucanmovethecursorbackwardsandforwardsinthetextyou
have written. This can be helpful if there is an error in the text.
YELLOW changes between capital and small letters.
BLUE deletes the last letter.
Whenyouhavewrittenyourtext,placethecursoronOK and press OK.