User manual

11Maximum C 901 CX
6
6
5
5
10. EPG - Electronic Program Guide
A big advantage of digital receivers is that a number of operators send, what is called an
EPG(ElectronicProgramGuide).TheEPGgivestheuseradisplayofwhichprogramswill
be on what channels.
To see this information press EPG. The TV screen will look as
shown in the picture to the right. Showing information on the
PresentandtheNextprogramforthenextvechannelsinthe
channel list. Using PR+and PR-PR-highlightthechannelyouwish
to see more information on and press OK.
Ifyoucannotseetheprogramyouwishtohaveinformationon,
press and to choose the next or previous page. The receiver
willnowcollectmoreinformationonthechannel,suchastheprogramsforthenext7days.
This can take up to 30 seconds.
Theexactnumberofdaysshown,dependsontheprogram
distributorandcanvaryfromchanneltochannel.Insomecases,
thepicturewilldisappearwhilsttryingtondtheEPGdata.More
informationabouttheprogramcanbefoundbypressingOK.
Ifyouwouldliketorecordaprogramonavideorecorder,youcan
sendtheinformationtothetimerbypressingGREEN. Remember
to set the Timer on the video recorder to start at the same time.
Ifyouwouldratherchangetotheprogram,pressYELLOW. To come out of the EPG func-
tion, press EXIT until the picture comes back.
11. Timer
The receiver can start at a planned time. Used together with a Video recorder or a DVD
recorder,thetimerwillenableyoutorecordprograms.
Press MENU to enter the Menu. Press PR-PR-until Timer is highlighted, then press OK. The
TVscreenwillnowshowalistofthetimersthathavebeenprogrammed.Ifyouwouldliketo
program a new timer, press YELLOW.
Thefollowinginformationhastobeputintothetimer:
List=Thelistyouknowthechannelwiththeprogramyouwouldliketorecordisin.
Channel=Thechannelyouwouldliketorecordon.
Text=Anametohelpyourememberwhichtimeriswhich.
Start = When the program starts.
Press GREEN to save the timer, or RED to cancel the timer.
Remember to also program the Video Recorder or DVD recorder.