User Manual

8
model no. 054-2092-0 | contact us 1-888-670-6682
ADDITIONAL SAFETY WARNINGS FOR HAMMER
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can cause personal
injury.
Hold power tools by insulated gripping surfaces, when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Cutting accessory
contacting a ‘live’ wire may make exposed metal parts of the power tool ‘live’ and
could give the operator an electric shock.
ADDITIONAL SAFETY WARNINGS FOR HAMMER
Always wear a dust mask.
Connect the plug to the outlet only when the tool is switched off. After using, pull
the plug.
Always direct the cable to the rear away from the machine.
Persons under 16 years of age are not permitted to operate this machine.
Keep the tool and accessories out of the reach of children.
Remove the plug from the outlet before carrying out any adjustment, servicing or
maintenance.
Fully unwind cable drum extensions to avoid potential over heating.
When an extension cable is required you must ensure it has the correct ampere
rating for your power tool and that it is in a safe electrical condition.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
Your tool is double insulated for additional protection against a possible electrical
insulation failure within the tool.
Always check walls and ceilings to avoid hidden power cables and pipes.
After long working periods, external metal parts and accessories could be hot.
Wear eye protection when operating this tool.
Your hand must hold on the handle when you are working.