TM 5/8" (16 mm) Rotary Hammer Model no. 054-2092-0 IMPORTANT: Please read this manual carefully before using this product, and save it for reference.
TM 3 TECHNICAL SPECIFICATIONS 4 GENERAL POWER TOOL SAFETY WARNINGS 5 ADDITIONAL SAFETY WARNINGS FOR HAMMER 8 SYMBOLS 9 KEY PARTS DIAGRAM 10 ACCESSORIES 11 PARTS LIST 12 OPERATING INSTRUCTIONS 14 WORKING HINTS FOR YOUR HAMMER 17 MAINTAIN TOOLS WITH CARE 18 WARRANTY 19 NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions.
model no. 054-2092-0 | contact us 1-888-670-6682 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS VOLTAGE AMPS NO-LOAD SPEED IMPACT RATE CHUCK IMPACT ENERGY PROTECTION CLASS DRILLING CAPACITY MAX. MASONRY STEEL WOOD CORD LENGTH MACHINE WEIGHT 120 V 60 Hz AC 5.5 A 0 - 1300 RPM 0 - 46000 BPM 5.8” (16 MM) SDS-PLUS® 2 ft-lb (2.8 J) /II 5/8’’ (16 mm) 1/2’’ (13 mm) 1 3/16” (30 mm) 10’ (3 m) 7 lb 14 oz (3.
TM 5 • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
model no. 054-2092-0 | contact us 1-888-670-6682 GENERAL POWER TOOL SAFETY WARNINGS ELECTRICAL SAFETY • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. • Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
ADDITIONAL SAFETY WARNINGS FOR HAMMER 8 model no. 054-2092-0 | contact us 1-888-670-6682 HAMMER SAFETY WARNINGS Wear ear protectors. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. Hold power tools by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring or its own cord.
TM 9 SYMBOLS To reduce the risk of injury, user must read instruction manual Double insulation Warning Wear ear protection Wear dust mask Don’t use in the rain SYMBOLS Wear eye protection
model no. 054-2092-0 | contact us 1-888-670-6682 No. Description No. Description 1 Switch lock-on button 7 Locking sleeve 2 On/off switch with variable speed control 8 Sds-plus chuck 3 Forward and reverse rotation control 9 Depth gauge 4 Function mode selection switch 10 Keyed chuck adaptor* (see Fig. A) 5 Auxiliary handle 11 Chuck shank* (see Fig.
TM 11 ACCESSORIES 1 1 ACCESSORIES Auxiliary handle Depth gauge We recommend that you purchase your accessories from the same store that sold you the tool. Use good-quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
209 96 8(4) 1 2 56 67 68 34 201 69(3) 71 21 70 20 7 208 52 9 72 12 58(2) 26 59 A 203 29 28 27 38 65 b 39 31 30 18 19 a c B 77 a b 4 66 36 43 42 35 204 41 34 40 33 32 207 64 2 6360 76 6162 75(2) 60 73 74 57 206 25 23 24 56 11 55 53 54 22 10 202 13 14 15 16 17 PARTS LIST d 78 44(3) 37 6 4 84 W 45 5 210(2) A W 3 T 87 2 1 93 86(2) X U T 85 B 82(4) 49 79 80 81 205 47(2) 46 48 87 U C X 89(4) 83(2) C 51(3) D 88 50 5 1 90 9
No. Description No.
model no. 054-2092-0 | contact us 1-888-670-6682 INTENDED USE OPERATING INSTRUCTIONS The hammer is intended for hammer drilling in concrete, brick and stone as well as for light chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. INSERTING/REPLACING THE KEYED CHUCK ADAPTOR (FIG. A) 10 11 7 Inserting the keyed chuck adaptor To work with tools without SDS-Plus (e.g.
10 11 7 TM Fig. A 15 MOUNTING OF BIT IN KEYED CHUCK ADAPTOR Before mounting the drill bit, attaching the 3/8” (13 mm) keyed chuck, insert drill bit between the chuck jaws as far as it will go. Ensure drill bit is in the centre of the chuck jaws. Using the chuck key provided, there are three holes in which the chuck key should be inserted. Tighten them equally in turn at each of the three holes, not just at one hole. Your drill bit is now locked in the chuck.
model no. 054-2092-0 | contact us 1-888-670-6682 Fig. C OPERATING INSTRUCTIONS ADJUSTABLE DEPTH GAUGE Fit the drill bit into the chuck. Loosen the depth gauge by rotating the handle grip counter-clockwise. Slide the depth gauge until the distance between the depth gauge end and the drill bit end is equal to the depth of the hole you wish to make. Then clamp the depth gauge by rotating the handle clockwise.
WORKING HINTS FOR YOUR HAMMER • If your power tool becomes overheated, set the speed to maximum and run no load for 2-3 minutes to cool the motor. • SDS-plus tungsten carbide drill bits should always be used for concrete and masonry. • When drilling in metal, only use HSS drill bits in good condition. • Where possible use a pilot hole before drilling a large diameter hole.
model no. 054-2092-0 | contact us 1-888-670-6682 MAINTAIN TOOLS WITH CARE MAINTAIN TOOLS WITH CARE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user-serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean.
TM 19 a) Component A: Batteries/chargers can be repaired or replaced due to defects in workmanship and materials for a period of 3 years from the date of original retail purchase; b) Component B: The carrying case is guaranteed for a period of 1-year from the date of original retail purchase against defects in workmanship and materials. c) Component C: Accessories, including drill bits and saw blades, do not carry a warranty.
model no. 054-2092-0 | contact us 1-888-670-6682 WARRANTY attempted by anyone other than the Service Provider (i.e.
TM 21 Under no circumstances shall the retailer, Maximum Canada, or manufacturer be liable to the purchaser for any claim for (a) indirect, special, punitive, incidental, exemplary, or consequential damages, (b) compensation for loss of profits, anticipated revenue, savings or goodwill, or other economic loss of the purchaser, (c) exemplary, aggravated or punitive damages howsoever incurred, (d) contribution or set-off in respect of any claims against the purchaser, (e) any damages whatsoever relating to
