User Manual

SAW BLADE ASSEMBLY AND REMOVAL

(See Fig. A)

Wear protective gloves when mounting the saw

blade. Danger of injury when touching the saw

blade.

Only use saw blades that correspond with

the characteristic data given in the operating

instructions.

Do not use grinding discs on this cutting tool

under any circumstances.

SAFETY ON/OFF SWITCH (See Fig. B)

The on/off switch is locked off to prevent

accidental starting.

In order to turn the machine on, pull the lock-off

switch (11) backward, depress the on/off switch

(12), then release the lock-off switch (11). Your

switch is now on.

To switch off, just release the on/off switch.

OPERATING INSTRUCTIONS

WARNING!

Before any work on the machine itself, unplug the saw.

WARNING:

When mounting, ensure that the cutting direction of the teeth

(direction of arrow on saw blade) and the direction-of-rotation arrow above the

blade guard match.

FPO

NOTE: Before using the tool, read the instruction book carefully.

NOTE: Remove both wrenches after the saw blade is tightly attached.

NOTE: Never use a blade that is too thick to allow the blade

clamping washer to engage with the flat side of the spindle.

NOTE:

When the machine is not in use, the lock off switch rests against

the blade guard in order to block the plunge function and prevent the

blade from being exposed

unnecessarily.

Fig. A

Fig. B

Fig. C1

Fig. E

Fig. D2

Fig. C2

Fig. D1