User Manual

98
model no. 058-9841-8 | contact us 1-888-670-6682
CAUTION!
Potential hazard that may result in injury or damage
to equipment.
CAUTION!
Potential hazard that may result in injury or damage
to equipment.
NOTE: Recycle unwanted materials rather than disposing of them
as waste. Sort the tools, hoses, and packaging in specific categories
and take them to the local recycling centre or dispose of them in an
environmentally safe way.
Carry the tool by the handle only. Do not carry the tool with
a finger on the trigger. Do not carry the tool by the hose,
the magazine nor any other part.
Keep proper footing at all times in order to ensure correct
balance.
Do not use a tool that is leaking air, with missing or
damaged parts, or that requires repairs. Verify that all
screws are securely tightened.
For optimal safety and tool performance, inspect the tool
before every use in order to ensure free movement of
the trigger, safety mechanisms, and spring.
Keep the work area clean. A cluttered or dirty workbench
or floor is more prone to accidents. They should be kept
clear and clean.
This tool is not a toy. Use it with caution.
Tripping h
loading or changing staples, when the tool is not in use.
azard: The air hose may become a tripping
hazard when it is placed in the work area.
Do not store the tool in a freezing environment to prevent
ice formation on the operating valves of the tool, as doing
so may c
ause tool failure.
Use safety goggles and ear protection:
Wear safety glasses with side shields when operating
the tool and verify that others in the work area are
also wearing safety glasses. Safety glasses must
provide protection from flying particles from the
front and the sides.
Air-powered tools are loud and the sound can cause hearing
damage. Always wear ear protection to prevent
hearing damage and loss. Failure to comply may
result in injury.
Do not use w
hile under the influence of alcohol,
drugs or medication.
TM
Disconnect the tool from the air supply and turn off
the compressor before performing any maintenance,
when it is being handed to another person, and when
it is left unattended. Failure to comply may result in
injury or damage to equipment.
R