User Manual

model no. 054-3213-8 | contact us 1-888-670-6682
18 19
TM
RUNNING NUTS AND BOLTS
Variable speed control must be used with caution for driving nuts and bolts with socket
set attachments. The technique is to start slowly, increasing speed as the nut or bolt
runs down. Set the nut or bolt snugly by slowing the tool to a stop. If this procedure is
not followed, the tool will have a tendency to torque or twist in your hands when the
nut or bolt seats.
OPERATING INSTRUCTIONS
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
BATTERIES
The battery pack is equipped with lithium-ion rechargeable batteries. The duration of
use from each charge will depend on the type of work performed.
The batteries in this tool have been designed to provide maximum trouble-free life.
Like all batteries, they will eventually wear out. Do not disassemble the battery pack
or attempt to replace the batteries. Handling of the batteries, especially when wearing
rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, read and understand the operator’s manual.
•Itisgoodpracticetounplugthecharger/adapterandremovethelithium-ion
battery pack when not in use.
FOR LITHIUM-ION BATTERY PACK STORAGE LONGER THAN 30 DAYS:
•Storethelithium-ionbatterypackwherethetemperatureisbelow79°F(26°C)and
free of moisture.
•Storelithium-ionbatterypacksina30–50%chargedcondition.
•Everysixmonthsofstorage,fullychargethelithium-ionbatterypack.
•Exteriormaybecleanedwithaclothorsoftnon-metallicbrush.
MAINTENANCE
WARNING!
•Toavoidseriouspersonalinjury,alwaysremovethebattery
pack from the tool when cleaning or performing any
maintenance.
•Whenservicing,useonlyidenticalreplacementparts.Use
of any other parts may create a hazard or cause product
damage. To ensure safety and reliability, all repairs should be
performed by a qualified service technician.
•Itisnotrecommendedtousecompresseddryairtoclean
the driver. If cleaning with compressed air is the only method
available, always wear safety goggles or safety glasses with
side shields when using compressed air to clean the tool. If
the operation is dusty, also wear a dust mask.
•Donotatanytimeletbrakefluids,gasoline,petroleum-
based products, penetrating oils, etc. to come in contact
with plastic parts. Chemicals can damage, weaken or destroy
plastic which may result in serious personal injury.