Specifications

What happens next?
MCE 0111, TR 0111
Signals start by showing red.
It is recommended that, when it is safe to do so
– working on one approach at a time, turn the
signal heads to face oncoming vehicles. Ensure
the MVDs are also aligned to face the vehicles.
Switch to Vehicle Actuated (VA). The signals to
one approach will change – red/amber, green.
Other approaches will stay red until the end of
the first approach green. The signals will then
cycle in the normal fashion.
Check the timings and the operation of
the MVDs.
TR 2502
The sequence will start by closing down
each approach in sequence through amber,
then red. On the last approach, the signals will
show green.
The signals will then cycle in the normal fashion.
Check the timings and the operation of
the MVDs.
Controllers to 027-008-024 – consult the instructions for the equipment.
16