Product Manual A

MRT190H
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.621-2789
24
Hydraulic Oil:
• The Hydraulic oil reservoir of your
unit has been shipped, from the
factory, already filled with
Hydraulic oil.
• To check level, unscrew the
Hydraulic Oil reservoir fill plug
from the top of the Hydraulic
reservoir. Correct level should be
to the bottom of the oil fill tube
inside tank approx. 1” inch.
• Capacity approx. one gallon.
Fuel:
• Fill the fuel tank. Use clean, fresh, lead-free
gasoline. DO NOT MIX OIL WITH GASOLINE.
• Fill fuel tank to bottom of filler neck. Do not
overfill. Use fresh, clean, regular unleaded
gasoline with a minimum of 87 octane. (Use of
leaded gasoline will increase carbon and lead
oxide deposits and reduce valve life). Do not mix
oil with gasoline. Purchase fuel in quantities that
can be used within 30 days to assure fuel
freshness.
⚠
CAUTION
CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow for fuel
expansion. If gasoline is accidentally spilled, move machine away from area of spill. Avoid
creating any source of ignition until gasoline vapors have disappeared.
Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.
Gasoline is highly flammable and explosive, you can be burned or seriously
injured when handling fuel. Use extreme care when handling gasoline or other
fuels. They are flammable and vapors are explosive.