Product Manual A

MRT190H
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.621-2789
23
3.4 General Information
Engine Honda GX270
Transmission Hydro/Wheel Motors
Tine speed (max) 300 RPM Dual Rotating
Tines Replaceable, bolt on
Tilling width 18”
Tilling depth 8”
Drag Bar Adjustable
Handles Adjustable
Tires 4.80/4.00-8
Dimensions (L x W x H) 69” x 21” x 42”
Shipping weight 315 lbs.
4 ASSEMBLY
Your tiller comes fully assembled and should not require anything other than fuel. It is highly
recommended that both the Engine Oil and the Hydraulic oil levels are verified full.
4.1 Final Set-up
Engine Oil:
• The engine of your unit has been shipped, from the factory, already filled with SAE 30
summer weight oil.
• With engine level, clean area around oil filler plug and remove plug.
• Engine oil should be to point of overflowing when engine is level. For oil specifications
and capacity see your Honda engine manual shipped with unit.
• Reinstall engine oil cap and tighten.
• To change engine oil, see the Maintenance section in this manual.