Product Manual A

MRT190H
800-621-2789 RT190H Rev B.1 Page 17
15. Use only attachments and accessories approved by the manufacturer of the tiller.
16. Never operate the tiller without good visibility or light.
17. Be careful when tilling in hard ground. The tines may catch in the ground and propel the
tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.
2.8 Storage
1. Keep machine, attachments, and accessories in safe working conditions.
2. Check assembly pins, engine mounting bolts, and other bolts for proper tightness to be
sure the equipment is in safe working condition.
3. Check for Hydraulic leaks from hoses or at hose connections.
4. Never store the machine with fuel in the fuel tank inside a building where ignition sources
are present, such as hot water and space heaters, clothes dryers, etc. allow the engine to
cool before storing in any enclosure.
5. Fuel stabilizer is an acceptable alterative in minimizing and formation of fuel gum deposits
during storage. Run engine at least 10 minutes after adding stabilizer to allow the
stabilizer to reach the carburetor. It is not necessary to drain either carburetor or fuel
tank when using fuel stabilizer.
6. Touch up all rusted or chipped paint surfaces; sand lightly before painting.
7. If possible, store your unit indoors and once sufficiently cooled, cover it to give protection
from the elements.