Datasheet

REF01/REF02
+5V, +10V Precision
Voltage References
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS–REF01
ELECTRICAL CHARACTERISTICS–REF01
(V
IN
= +15V, T
A
= +25°C, unless otherwise noted.)
ELECTRICAL CHARACTERISTICS –REF01
(V
IN
= +15V, -55°C ≤ T
A
≤ +125°C for REF01A and REF01, 0°C ≤ T
A
≤ +70°C for REF01E and REF01H, I
L
= 0mA, unless otherwise
noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Input Voltage
REF01, A, E, H, All DICE .....................................................40V
REF01C ...............................................................................30V
Continuous Power Dissipation
T099 (J) (derate at 7.1mW°C above +80°C).................500mW
CERDIP (2) (derate at 6.7mW/°C above +75°C) .........500mW
Plastic Dip (P) (derate at 5.6mW/°C above +36°C) .....500mW
Small Outline (S) (derate at 5.0mW/°C above +55°C) ..300mW
Output Short-Circuit Duration
(to ground or V
IN
) .......................................................Indefinite
Storage Temperature Range .............................-65°C to +150°C
Operating Temperature Range
REF01A, REF01 ..............................................-55°C to +125°C
REF01E, REF01H, REF01C
(except REF01CESA)...........................................0°C to +70°C
REF01CESA......................................................-40°C to +85°C
DICE Junction Temperature (Tj) ........................-65°C to +150°C
Lead Temperature (soldering, 60s) .................................+300°C
REF01A/E REF01/H
PARAMETER SYMBOL CONDITIONS
MIN TYP MAX MIN TYP MAX
UNITS
Output Voltage V
O
I
L
= 0 9.97 10.00 10.03 9.95 10.00 10.05 V
Output Adjustment Range ∆V
trim
R
P
= 10kΩ ±3.0 ±3.3 ±3.0 ±3.3 %
Output Voltage Noise e
nP-P
0.1Hz to 10Hz (Note 1) 20 30 20 30 µV
P-P
Line Regulation V
IN
= 13V to 33V (Note 2) 0.006 0.010 0.006 0.010 %/V
Load Regulation I
L
= 0 to 10mA (Note 2) 0.005 0.008 0.006 0.010 %/mA
Turn-On Settling Time t
ON
To ±0.1% of final value 5 5 µs
Quiescent Supply Current I
SY
No load 1.0 1.4 1.0 1.4 mA
Load Current I
L
10 21 10 21 mA
Sink Current I
S
-0.3 -0.5 -0.3 -0.5 mA
Short-Circuit Current I
SC
V
O
= 0V 30 30 mA
REF01A/E REF01/H
PARAMETER SYMBOL CONDITIONS
MIN TYP MAX MIN TYP MAX
UNITS
0°C ≤ T
A
≤ +70°C 0.02 0.06 0.07 0.17
Output Voltage Change with
Temperature (Notes 3, 4)
∆V
OT
-55°C ≤ T
A
≤ +125°C 0.06 0.15 0.18 0.45
%
Output Voltage Temperature
Coefficient
TCV
O
(Note 5) 3 8.5 10.0 25.0 ppm/°C
Change in V
O
Temperature
Coefficient with Output
Adjustment
R
P
= 10kΩ 0.7 0.7 ppm/%
0°C ≤ T
A
≤ +70°C 0.007 0.012 0.007 0.012
Line Regulation
(V
IN
= 13V to 33V) (Note 2)
-55°C ≤ T
A
≤ +125°C 0.009 0.015 0.009 0.015
%/V
0°C ≤ T
A
≤ +70°C 0.006 0.010 0.007 0.012
Load Regulation
(I
L
= 0 to 8mA) (Note 2)
-55°C ≤ T
A
≤ +125°C 0.007 0.012 0.009 0.015
%/mA