Specifications

Maintenance
6-4
MORRIS Industries Ltd.
Trip Maintenance
400 Spring Cushion Trips
Shank Replacement
The dirt shield must be removed to install a new
shank. This allows access to the shank bolt nut.
• Loosen the two jam nuts that retain the dirt shield.
• Use a screw driver to remove dirt shield.
CAUTION
Use care when removing shield, Personal
injury may occur.
• With shank in place, the shank bolt can be
installed. Mount the shank clamp with the two
clamp strap bolts.
• Install dirt shield.
• Tighten the two jam nuts that retain the dirt shield.