Specifications

Maintenance
6-2
MORRIS Industries Ltd.
Tighten Bolts
• Before operating the machine.
• After the first two hours of operation.
• Check tightness periodically thereafter.
• Use Bolt Torque Chart for correct values on various
bolts.
• Note dashes on hex heads to determine correct
grade.
Note: DO NOT use the values in the Bolt Torque
Chart if a different torque value or
tightening procedure is given for a specific
application.
• Fasteners should be replaced with the same or
higher grade. If higher grade is used, only tighten
to the strength of the original.
Tires
• Inspect tires and wheels daily for tread wear, side
wall abrasions, damaged rims or missing lug bolts
and nuts. Replace if necessary.
• Tighten wheel bolts - refer to Bolt Torque Chart.
• Check tire pressure daily, when tires are cold.
• Correct tire pressure is important.
• Do not inflate tire above the recommended
pressure.
Tire replacement requires trained
personnel and proper equipment.
trahCeuqroTtloB
5edarG8edarG
gnikraMtloB
tloB
eziS
gnikraMtloB
mN.tf.bl.tf.blmN
1184/1 2161
32 71 61/5 42 33
1403 8/3 5416
86 05 61/7 07 59
20157 2/1 501241
941 011 61/9 551 012
302051 8/5 012582
663 072 4/3 573 805
635593 8/7 016728
008 095 1 019 4321
0511058 8/1-1 05310581
0561 0021 4/1-1 0591 0062
05120551 8/3-1 05520043
0582 0012 2/1-1 0533 0554
snoitacificepSeriT
EZISEGNARDAOLERUSSERP
IF51xL5.9D.I.S.P06
LS51xL11gnitarylp6.I.S.P82
IF51xL11D.I.S.P06
IF51xL11F.I.S.P58
IF51xL5.21F.I.
S.P09