Specifications

MORRIS Industries Ltd.
5-18
Operation
General Guidelines
The results obtained from the Maxim Air Drill are
directly related to the depth uniformity of the unit. Poor
levelling worn shovels, uneven tire pressures, and bent
shanks must be avoided to obtain optimum field results.
• Operating depth should be uniform at all shank
locations, when spot checking the implement in the
field. See Levelling and Rephasing Procedure.
• Points should be adjusted according to wear. See
Maintenance Section.
• Repair or replace bent shanks. Bent shanks cause
shovels to work at uneven depths and can cause
unnecessary ridging. See maintenance Section.
• Keep tire pressure at the listed specifications to
maintain proper level. See maintenance Section.
• Avoid sharp turns. Turns sharp enough to cause
the inside shovels of the Air Drill to reverse direction
are not recommended. This may cause the seed
openers to plug.
TAKE SAFETY SERIOUSLY.
Do Not Take Needless Chances!
CAUTION
Care should be taken
when working near the Air
Cart while the fan is
running. Product blowing
out of the system could
cause personal injury.