Specifications

MORRIS Industries Ltd.
5-11
Operation
Opener Adjustments
Edge-On Point Adjustment
The Point can be adjusted down 3 positions in
increments of 3/8”.
Note: In wet or gumbo land, only move the point
down to prevent plugging.
Note: Points can be lowered to compensate for
tractor tire impressions.
3 1/2” Sweep
• Insert hose 7/8” past hose holder as shown in
diagram.
• Secure hose to holder with a hose clamp.
Note: If plugging occurs decrease dimension
hose extends past hose holder.
Trip Lowering Kit
For the Conventional Shank, a trip lowering kit is
available to compensate for tractor tire impressions.
This kit will lower the trip 3/8”.
Trip lowering Kit Part Number is C20521.
ecneuqeSgnitsujdAlamroN
tnioPknahStooBdeeS
1eloHelddiMhctoNpoTeloHmottoB
2eloHmottoBhctoNmottoBeloHmottoB
3eloHpoThctoNpoTeloHelddiM
4eloHeld
diMhctoNmottoBeloHmottoB
POINT
SEED BOOT
EDGE-ON SHANK
Part Number S32010