Specifications

MORRIS Industries Ltd.
5-9
Operation
Field Clearance Settings - continued
Double Shoot/Knife Openers
Upper Height Setting
a) Mount main frame gauge wheel in upper holes.
b) Mount packers on main frame in upper holes.
c) Place spacer on the top of wear plate.
• Wear plates are located on the wing gauge
wheel lower link.
• Wear plate should contact the hitch truss in
the middle as shown.
Note: On the 49 ft. model, the wear plate is used
only on the outer wings.
(B) Packers Main Frame
UPPER HOLES
(C) Wear Plate
SPACER
(A) Gauge Wheel Main Frame
UPPER HOLES