Specifications

MORRIS Industries Ltd.
5-5
Operation
Transport - continued
Field to Transport Position
• Position machine on level ground.
• Stop tractor, and engage park brake.
• Ensure wing lift cylinders are fully extended.
Note: On five-section models the wing lift
cylinders must be fully extended to ensure
proper operation of the FCV manifold.
• Raise Air Drill to highest position, depth control
hydraulics.
• Install transport lock pin for main frame gauge
wheel.
• Secure main frame gauge wheel castor lock pin.
It is important to pin the gauge wheel to
prevent excessive shimming of wheels.
• Operate the wing lift hydraulics. First, lower the
transport wheels fully. Second, raise the wings
fully.
• Secure wing transport lock strap pins and swing
the transport wheels gravity locks down. Do not
walk under raised wings.
• Install wing rest pins after wing trasport lock
strap pins are installed.
• Ensure safety chain is properly installed, see
page two of Operation Section.
• Retract packers with depth control circuit.
Note: The front gauge wheel lock pin must be
installed to do this.
DANGER
Always stay clear of wings being raised,
lowered or in elevated position. Ensure
cylinders are completely filled with
hydraulic fluid - Wings may fall rapidly
causing injury or death.
Main Frame Gauge Wheel Castor
TRANSPORT LOCK PIN
AXLE PIVOT LOCK
Gravity Lock and Lock Straps
GRAVITY LOCK
PIN
TRANSPORT
LOCK STRAPS
Wing Rest
PIN WING REST