Specifications

MORRIS Industries Ltd.
5-4
Operation
Transport - continued
Transport to Field Position
• Position machine on level ground.
• Stop tractor, and engage park brake.
• As a precaution, check surrounding area to be
sure it is safe to lower wings.
• Extend main frame depth cylinders. (Fully
extending the packers)
• Ensure wing transport lock strap pins are
installed, before removing Wing Rest Pins.
• Remove wing transport lock strap pins and
swing the transport wheels gravity lock up. Do
not walk under raised wings.
• Operate the wing lift hydraulics. First, lowering
the wings fully. Secondly, raising the transport
wheels fully. Never raise or lower wings when
moving.
• Ensure wing lift cylinders are fully extended.
• Remove transport lock pin and castor lock pin
from main frame gauge wheel.
• Operate depth control hydraulics, to raise
machine fully, holding the hydraulic lever for
several seconds to phase the system.
• On the Five Frame Models ensure that the inner
wing foot has retracted.
Note: Wings must lower fully before the
transport wheels retract. See transport
hydraulics.
DANGER
Always stay clear of wings being raised,
lowered or in elevated position. Ensure
cylinders are completely filled with
hydraulic fluid - Wings may fall rapidly
causing injury or death.
Main Frame Gauge Wheel Castor
TRANSPORT LOCK PIN
AXLE PIVOT LOCK
Gravity Lock and Lock Straps
GRAVITY LOCK
PIN
TRANSPORT
LOCK STRAPS
Wing Rest
PIN WING REST