Specifications

MORRIS Industries Ltd.
5-3
Operation
Unhitching from Tractor
• Pin hitch jack in storage position.
• Lower hitch jack taking the weight off the hitch
clevis.
• Ensure all transport locks are properly secured.
• Relieve pressure in the hydraulic hoses by
positioning tractor hydraulic lever in “float” position
or turn tractor engine off and cycle lever back and
forth several times.
• Disconnect the hydraulic hoses.
• Remove the safety chain.
• Remove the drawbar pin.
• Slowly move tractor away from cultivator.
Transport
Observe all applicable safety precautions under
transport heading in Safety, Section 1.
• Refer to Specifications, Section 2 for weight,
transport height and width.
• Transport with tractor only!
• Always connect safety chain provided to the
towing vehicle and the hitch of the seed cart.
• Inspect tires for any serious cuts or abrasions. If
such has occurred, tire should be replaced.
• Raise and lower wings on level ground.
• Never raise or lower wings when moving.
Speed
• Only tow at safe speeds.
• The weight of the implement being towed must
not exceed 1.5 times the weight of towing vehicle.
• Do Not Exceed 20 M.P.H.
Lights
• Ensure proper reflectors are in place, refer to
Safety Section 1.
• Be familiar with and adhere to local laws.
MORRIS INDUSTRIES LTD. WILL NOT BE
RESPONSIBLE FOR ANY DAMAGES OR
OPERATOR INJURY RESULTING FROM
NON-USE OR IMPROPER USE OF
TRANSPORT LOCKS.
CAUTION
Raise and lower wings on level ground.
Never raise or lower wings when moving.
Hitch Jack Lowered