36 in. User Manual

STEP 3

1) Raise the fan and place the hanger ball onto mounting bracket.

2) Rotate the fan until the notch on hanger ball snapped into the slot on mounting bracket and

sits firmly.

NOTE : THE DOWNROD AND HANGER BALL SHOULD NOT ROTATE IF THIS STEP IS DONECORRECTLY.

3) Tighten the safety wire clamp.

4) Place ring of safety wire through the expansion bolt or self tapping screw and fix it to the

building structure.

5) Connect the wire connector plugs correctly. The wire connector plugs design with fool proof

device, please don’t force to plug. Otherwise it may affect the normal use of the light fan or

burn the fan motor.

INSTALLATION INSTRUCTION

Safety Wire Clamp

Controller

Fan