36 in. User Manual

6
STEP 2A – OUTLET BOX
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT
BREAKER FUSE BOX.
1) Install the mounting bracket (1) onto Outlet Box (3)
with the Mounting Screws(2).
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX
MARKED (ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG
(35LBS) OR LESS) AND USE MOUNTING SCREWS
PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT
DIRECTLY FROM BUILDING STRUCTURE.
STEP 2B - CONCRETE CEILING
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT
BREAKER FUSE BOX.
1) Use the Mounting Bracket (1) as a guide, mark the
spots where the 4 Expansion Bolts (2) will be drilled.
2) Remove the Mounting Bracket (1), drill 4 holes and
insert 4 Expansion Bolts (2) into the concrete ceiling,
install the mounting bracket and secure with Flat
Washers (3), Spring Washers (4) and Nuts (5).
IMPORTANT: SCREWS & NUTS MUST BE TIGHTENED TILL
SNUG
STEP 2C - WOODEN CEILING
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT
BREAKER FUSE BOX.
1) Use the Mounting Bracket (1) as a guide, mark the
spots where the 4 Self Tapping Screws (2) will be
drilled.
2) Remove the Mounting Bracket (1), drill 4 holes for
3MM diameter, install the mounting bracket onto
wooden ceiling with the 4 Self Tapping Screws (2) &
Washers (3).
IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG
INSTALLATION INSTRUCTION
Outlet Box(3)
Mounting
Bracket (1)
Mounting
Screws (2)
Mounting Bracket (1)
Expansion Bolts(2)
Flat
Washers(3)
Spring
Washers(4)
Nuts(5)
Mounting Bracket (1)
Self Tapping
Screw (2)
Washers
(
3
)