28 in. User Manual

8
STEP 4
SWITCH OFF THE ELECTRICAL MAINS AT
THE CIRCUIT BREAKER FUSE BOX.
1) Connect wires from controller to
power supply with wire connectors. 
2) Insert the controller and LED Driver
into the space of the mounting
bracket, and tidy up the wiring.
STEP 5
1) Carefully push the canopy to the
bottom of the mounting bracket,
make two sliding holes aligned to the
two prominent screws on the
mounting bracket, and then turn
clockwise until tight.
2) Push the canopy ring to the bottom
of the canopy, canopy ring will be
magnetically attached to the canopy.
INSTALLATION INSTRUCTION
Controller
(Receiver)
MOTOR U
AC IN L
AC IN N
MOTOR V
MOTOR W
LIGHT N
LIGHT L
Hanger Ball Mounting Bracket
Antenna
LED Driver
Light
Fan
G
Live
Neutral
Earth
Controller
LED Driver
Canopy
Canopy Ring