Assembly Instruction

Page 4 of (4)
Installation Instructions
1. Mark the mounting position on the surface to align the LED Lightbar.
2. Align and secure the mounting clips to the surface.
3. Gently push the LED Lightbar into the mounting clips.
4.
Connect LED Lightbars to create a continous row like (A)(B) (C) (D) . Be careful not to g o over the wattage
limit of the driver when connecting LED Lightbars.
5. Check the connections and turn the power on.
LIGHTBAR SILK INSTALLATION
• Pleas e make sure that the total power of the run does not exceed the rating of the driver
LIGHTBAR SILK WIRING DIAGRAM
+
+
-
-
+
+
-
-
AC 60W POWER
AC 96W POWER
DC
DC
24V
24V
AC100-277V/50-60Hz
AC100-277V/50-60Hz
INPU T:
INPU T:
60W Max
96W Max
Lightbar
Lightbar Lightbar Lightbar
Lightbar Lightbar
+
+
-
-
+
+
-
-
AC 60W POWER
AC 96W POWER
DC
DC
24V
24V
AC100-240V/50-60Hz
AC100-240V/50-60Hz
INPU T:
INPU T:
60W Max
96W Max
Lightbar
Lightbar Lightbar Lightbar
Lightbar Lightbar
+
+
-
-
+
+
-
+
-
+
-
-
AC 24W POWER
DC 96W Inline Dimmer DC24V
DC
24V
AC100-240V/50-60Hz
AC100-240V/50-60Hz
INPU T:
INPU T:
24W Max
96W Max
Lightbar
Lightbar Lightbar Lightbar
Lightbar Lightbar
AC POWER
DC
24V
WARNING: Wires need to be
connected to driver found in
canopy and should not be
connected directly to power
source or a short may occur.