Installation Sheet

ManualsBrandsMaxim Manualsunder cabinet lightingMaxim SL 12" LED Under Cabinet Light, 3000K Color Temperature

Page 1 of (5)

Light Source : LED Integrated 3W/6W/12W/18W/24W

Please consult a qualified electrician for hanging fixture and wiring.

Made in China / Hecho én China /Fabrique en China

PRODUCT NAME:MX-L120-SL Under Cabinet light

ITEM NUMBER:

88900

88901

88902

88903

88904

24V/60Hz

Summary of content (5 pages)

PAGE 1
PRODUCT NAME:MX-L120-SL Under Cabinet light ITEM NUMBER: 88900 88903 88901 88904 88902 Please consult a qualified electrician for hanging fixture and wiring.
PAGE 2
Before Getting Started Antes de comenzar Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit. When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Lorsque vous ouvrez le paquet avec un outil pointu comme un couteau de coupe, veillez à ne pas endommager les composants à l'intérieur. Carefully remove all packaging materials and retain for future use.
PAGE 3
x1 LAMP HARD WIRE DRIVER (SOLD SEPERATELY) x1 x2 SCREW x1 MOUNTING BRACKET JUNPER CORD (SOLD SEPERATELY) x1 x1 END TO END CONNETOR Page 3 of (5)
PAGE 4
Led Driver Box Input Flatpanel Output Flatpanel Led Driver Box Input Flatpanel Flatpanel If the cable is not long enough Led Driver Box Input CONTROL Each Control can support up to 96W per port. Control has two input ports and two output ports that are controlled simultaneously. TOTAL PANELS NOT TO EXCEED MAXIMUM SUPPLY WATTAGE FOLLOW LOCAL ELECTRICAL CODES: Wires may be cut and spliced with appropriate gauge wire for extended runs. 14 gau. wire is recommended on runs longer than 3 feet.
PAGE 5
LED Panel Installation: 1 – Locate LED panels fitting plate in desired location and fasten to fitting plate using provided screws. Note: Orient panel fitting plate so that the panel input socket is in the proper direction to mate with control cable. 2 - Fasten to fitting plate using provided screws. CAUTION: • Read all instructions before installing. • Turn off power at main switch power supply prior to installation to prevent electrical shock. 3– Using the magnet clips to fix in the hole of panel .