Assembly Instruction

1. Pull the power supply wires out from the outlet
box (A), and mount the mounting bracket
( B ) to the outlet box (A), using mounting
screws (D)
3. Attach the power supply wires to the fixture load
wires by connecting BLACK
to BLACK, and WHITE to WHITE . Attach the
POWER SUPPLY GROUND WIRE from the
outlet box (A) and the FIXTURE GROUND
WIRE from the fixture to the GREEN GROUND
SCREW (C) on the mounting bracket ( B )
or connect both wires together using the
correct size of wire connectors.
4. Placing the ceiling pan (E) with keyhole slots
on the fixture over the outlet box (A) and the
head of the screw (F) will pass throught the
large end of the keyhole slot. The ceiling pan
(E) must than be turned slightly so that screw
(F) head is over the smaller part of the opening
of the keyhole slot.Tighten screws (F) once
ceiling pan is in place.
5. Install light bulbs (not provided).
6. Turn the glass shade (G) onto the ceiling pan (E)
until it tightens.
2. Screw the screws (F) into the mounting bracket
(B)
and adjust the screws until the screw head
can out from the ceiling pan (E).
Assembly Instruction For
5852/87952