Installation Guide

PRODUCT NAME: WAFER LED FLUSH MOUNT

ITEM NUMBER:

Page 1 of (4)

Light Source : LED Integrated 10W / 15W / 20W

Please consult a qualified electrician for hanging fixture and wiring.

Made in China / Hecho én China /Fabrique en China

57720

57722

57724

46858256

120V/60Hz

PAGE 1
PRODUCT NAME: WAFER LED FLUSH MOUNT ITEM NUMBER: 57720 57722 57724 46858256 Please consult a qualified electrician for hanging fixture and wiring.
PAGE 2
Before Getting Started Antes de comenzar Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit. When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Lorsque vous ouvrez le paquet avec un outil pointu comme un couteau de coupe, veillez à ne pas endommager les composants à l'intérieur. Carefully remove all packaging materials and retain for future use.
PAGE 3
LAMP MOUNTING BRACKET x2 SCREW x3 WIRING NUTS G Page 3 of (4)
PAGE 4
1. Prior to installation, install the mounting plate on the junction box with mounting screws (make sure of engraved letter "OUTWARD" side facing downward). Drive screws completely to the end of the junction box. 2. Connect supply wires to wires on fixture with wirenuts. Connect white to white, black to black and copper wire to copper wire as grounding connection. 3. Completing the installation by pushing the fixture into the mounting plate.