Assembly Instruction

Page 4 of (4)
WHITE (NEUTRAL) WHITE
SUPPLY WIRE
FIXTURE WIRE
BLACK (HOT) BLACK
SUPPLY WIRE
FIXTURE WIRE
GROUND WIRE
FROM SUPPLY
GREEN/YELLOW
FIXTURE GROUND
GREEN/YELLOW
WHITE (NEUTRAL)
SUPPLY WIRE
WHITE
FIXURE WIRE
WIRE NUTS
BLACK
FIXURE WIRE
HOT
DIMMER WIRE
PURPLE SUPPLY
DIMMER WIRE
GRAY SUPPLY
DIMMER WIRE
PURPLE SUPPLY
FIXTURE+10V
OR GRAY SUPPLY
FIXTURE+10V
GROUND WIRE
FROM SUPPLY
GREEN/YELLOW
FIXTURE GROUND
GREEN/YELLOW
1. Prior to installation, install the mounting plate on the
junction box with mounting screws (make sure of
engraved letter "OUTWARD" side facing downward).
Drive screws completely to the end of the junction box.
2. Connect supply wires to wires on fixture with wire
nuts. Connect white to white, black to black and copper
wire to copper wire as grounding connection.
3. Completing the installation by pushing the fixture
into the mounting plate.
2 Wiring Guide
A. Install with Dimmer (0-10V) FOLLOW
DIMMER WIRING INSTRUCTIONS
B. Install without Dimmer
USE WIRE NUTS TO CAP OFF UNUSED
PURPLE AND GRAY DIMMER WIRES