Assembly Instruction

PRODUCT NAME: WAFER LED FLUSH MOUNT

ITEM NUMBER:

Page 1 of (4)

Light Source : LED Integrated 10W 20W

Please consult a qualified electrician for hanging fixture and wiring.

Made in China / Hecho én China /Fabrique en China

57721 57723 57725

993065

120V-277V/60Hz 0-10V Dimming

PAGE 1
PRODUCT NAME: WAFER LED FLUSH MOUNT ITEM NUMBER: 57721 57723 57725 993065 Please consult a qualified electrician for hanging fixture and wiring.
PAGE 2
Before Getting Started Antes de comenzar Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit. When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Lorsque vous ouvrez le paquet avec un outil pointu comme un couteau de coupe, veillez à ne pas endommager les composants à l'intérieur. Carefully remove all packaging materials and retain for future use.
PAGE 3
LAMP MOUNTING BRACKET x2 SCREW x5 WIRING NUTS G Page 3 of (4)
PAGE 4
A. Install with Dimmer (0-10V) FOLLOW DIMMER WIRING INSTRUCTIONS WHITE (NEUTRAL) WHITE SUPPLY WIRE FIXURE WIRE HOT BLACK DIMMER WIRE FIXURE WIRE PURPLE SUPPLY PURPLE SUPPLY DIMMER WIRE FIXTURE+10V WIRE NUTS GRAY SUPPLY 1. Prior to installation, install the mounting plate on the junction box with mounting screws (make sure of engraved letter "OUTWARD" side facing downward). Drive screws completely to the end of the junction box. 2. Connect supply wires to wires on fixture with wire nuts.