Installation Sheet
1
2
3
PRODUCT NAME:WAFER LED FLUSH MOUNT
ITEM NUMBER: 57710
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
MADE IN CHINA
R
Please consult a qualified electrician for hanging fixture and wiring.
CAUTION:Before starting the installation, disconnect the power by
turning off the circuit breaker or by removing the fuse at the fuse box.
Carefully unpack and identify all parts before assembly
Below is a List of Recommended Dimmers:
· Lutron DVELV-330P
· Lutron MAELV-600M
Due to inrush current wattage should not exceed
150 Watts of product for a 600 Watt dimmer.
10W / 15W / 20W AC LED
1. Prior to installation, install the mounting plate on the
junction box with mounting screws (make sure of
engraved letter "OUTWARD" side facing downward).
Drive screws completely to the end of the junction box.
2. Connect supply wires to wires on fixture with wire
nuts. Connect white to white, black to black and copper
wire to copper wire as grounding connection.
3. Completing the installation by pushing the fixture
into the mounting plate.
57712
57714
· Lutron SAELV-153P
· Leviton IPL06-10Z
· Leviton 6674-POW
· Legrand Tru-Universal ADTP703TUW4
This fixture is designed to dim with an Electronic Low
Voltage dimmer. Dimming levels will vary by dimmer.