Installation Sheet

PRODUCT NAME:

ITEM NUMBER: 57647

Bulbs ( included):Integrated

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

WARNING:

1.This product must be installed in accordance with the applicable installation code by a person

familiar with the construction and operation of the product and the hazards involved.

2.These products are designed to meet the latest NEC requirements and are classified for

compliance with the applicable UL standards.Before attempting installation of any lighting

fixture ,check your local electrical building code.This code sets the wiring and installation

requirements for your locality and should be understood before starting your work.

3.RISK of fire or electric shock.

4.LED Retrofit kit installation requires knowledge of luminaires electrical systems . If not

qualified, do not attempt installation . Contact a qualified electrician.

5.Install this kit only in the luminaires that have the construction features and dimensions

outlined in these instructions.

6. Do not make or alter any open holes in an enclosure of wiring or electrical components

during kit installation.

7. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or

other sharp objects.

Diverse LED (CRI 90)

Recommended Dimmers

The fixture is designed to dim

with a standard Triac forward

phase dimmer. Dimming levels

will vary by dimmer.

Below is a list of recommended

dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to inrush current wattage

should not exceed 150 watts of

product for a 600 watt dimmer.

PAGE 1
R PRODUCT NAME: Diverse LED (CRI 90) ITEM NUMBER: 57647 Please consult your electrician for hanging fixture and wiring. WARNING: Recommended Dimmers 1.This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. 2.These products are designed to meet the latest NEC requirements and are classified for compliance with the applicable UL standards.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A)Wire Nuts (B)Mouting screws (D)The lamp body (C)Mouting bracket Locate all hardware & components before discarding packaging Positive 1.) E Ground A Black E Ground Neutral White C B Step 1. Bring positive, neutral, and ground supply conductors (120V, 60Hz) to the room side from junction box(E). Ground E 2.