Assembly Instruction

B 1xLED 22.5W ulb (included):

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

The fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

Below is a List of Recommended dimmers:

.Lutron MACL-153M

.Lutron DVL-153P

.Lutron SCL-153P

.Leviton IPL06-10Z

.Leviton 6674-POW

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer．

WARNING:Wires need to be connected to driver

found in canopy and should not be connected directly

to power source or a short may occur.

Director Wall Mount

53033

PRODUCT NAME:

ITEM NUMBER:

PAGE 1
R PRODUCT NAME: Director Wall Mount ITEM NUMBER: 53033 Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a List of Recommended dimmers: .Lutron MACL-153M .Lutron DVL-153P .Lutron SCL-153P .Leviton IPL06-10Z .
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) (B) Bracket Mounting Screws 2Pcs (C) Ball Nuts 2Pcs Locate all hardware & components before discarding packaging A B 1.) A B C Step1:Remove mounting bracket from fixture and install to electrical box. Turnable White wire Black wire Connect to Neutral/White wire Connect to Live/Black wire 2.) C Fixture Ground wire C Step2:Wire fixture to wires in outlet box. Copper wire is for Ground.