Installation Sheet

G
Page 4 of (4)
Fig. 2
Mounting
Plate
Wirenut
Wirenut
Outlet Box
Supply Wire
Decorative
Back Plate
Fig. 1
Mounting
Plate
Box Screw
Outlet Box
Supply Wires
Outlet Box
Fig. 3
Screw
Mounting
Plate
Decorative
Back Plate
Always disconnect power at the main
electrical panel before installation.
Pull wall box wires through center hole of mounting
plate. Secure mounting plate to wa 1 using screws so
that the fixture mounting points are aligned vertically.
(See Fig. 1)
Follow wiring instructions (See Fig. 2)
After connecting all wires, push all wires and wirenuts back
through center. hole of mounting plate and into the cavity of
the electrical box,while positioning the fixture to align with
the mounting points / tabs.
4.
5
6.
7.
2.
3.
Secure decorative back plate with screws at top to the
mounting plate.(See Fig, 3)
Screw the two pieces iron sheet to the glasses.
1. Install the glasses to into the holder.