Installation Sheet

PRODUCT NAME: Optic Vanity Bath

ITEM NUMBER:52112 52114 52115 52116 52117

Page 1 of (4)

Light Source : LED Integrated 8W/12W/16W/20W/24W

120V-277V/60Hz 120V DIMMING ONLY

Please consult a qualified electrician for hanging fixture and wiring.

Made in China / Hecho en China /Fabrique en China

PAGE 1
PRODUCT NAME: Optic Vanity Bath ITEM NUMBER:52112 52114 52115 52116 52117 Please consult a qualified electrician for hanging fixture and wiring.
PAGE 2
Before Getting Started Antes de comenzar Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit. When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. Lorsque vous ouvrez le paquet avec un outil pointu comme un couteau de coupe, veillez à ne pas endommager les composants à l'intérieur. Carefully remove all packaging materials and retain for future use.
PAGE 3
x1 LAMP x2 GLASS x2 SCREW (5/32-32UNC L=1') x3 WIRING NUTS x4 SCREW (M4X14mm) x1 MOUNTING BRACKET G x2 IRON SHEET Page 3 of (4)
PAGE 4
Decorative Back Plate Mounting Plate Outlet Box Supply Wire Fig. 2 1. Install the glasses to into the holder. Wirenut Wirenut 4. Pull wall box wires through center hole of mounting plate. Secure mounting plate to wa 1 using screws so that the fixture mounting points are aligned vertically. (See Fig. 1) Screw G Fig. 3 2.Screw the two pieces iron sheet to the glasses. Mounting Plate Outlet Box Box Screw Outlet Box Supply Wires Fig. 1 3.