Installation Sheet

Installation Instructions

Model 39701CLPC

1. Turn breaker off for circuit on outlet where fixture is to be installed.

2. Remove X bracket from fixture and install to electrical box

3. Mark 4 holes on outer slots of bracket for hollow wall anchors

4. Remove X bracket from outlet

5. Drill 4 x 1/8” holes and insert hallow wall anchors

6. Reinstall X bracket to outlet and secure bracket to ceiling using 4 screws included

into hallow wall anchors

7. Wire fixture to wires in outlet box. Green wire is for Ground.

8. In

stall fixture to bracket and tighten 4 nuts so that fixture meets the ceiling.

9. Install inner crystal strings A to metal loops on bottom of. It is recommended to use

glove included and not touch crystal with bare fingers

10. Install 40 watt G9 xenon bulbs by gently pushing into socket.

(Caution: Xenon bulbs get very hot and may burn you. Always make sure bulbs are

off for a minimum 10 minutes before handling)

B-224(L:7.8")

A-180(L:7.5")

PAGE 1
Installation Instructions Model 39701CLPC 1. 2. 3. 4. 5. 6. Turn breaker off for circuit on outlet where fixture is to be installed. Remove X bracket from fixture and install to electrical box Mark 4 holes on outer slots of bracket for hollow wall anchors Remove X bracket from outlet Drill 4 x 1/8” holes and insert hallow wall anchors Reinstall X bracket to outlet and secure bracket to ceiling using 4 screws included into hallow wall anchors 7. Wire fixture to wires in outlet box. Green wire is for Ground.