Installation Sheet

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
1.)
2.)
Step.2: Wire fixture to wires in outlet box. Green
wire is for Ground.
Step.1:
Remove mounting bracket (A) and install to
electtical box.Mark where anchors meet ceiling,
remove mounting bracket from ceiling, and then
drill holes using
3
16
" drill bit where marked(B).
Install mounting bracket and attach anchors to
secure bracket at ends.
Step.3:
Screw finials (D) onto mounting bracket
(A) until canopy is flush with ceiling.
3.)
(B)
Anchor Bolts
(C)
Canopy
(A)
Mounting Bracket
A
B
C
D
F
4.)
(F)
Crystal
Step.4:
Secure the crystal strand assembly (F) to
the lamp body using provided screws.
(D)
Finial