Installation Sheet

2.)

1.)

(A)

Mounting Bracket

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation

Locate all hardware & components before discarding packaging

Cleaning & Care:

Page 2 of (2)

Clean with soft cloth and a mild detergent.

Do not use abrasive cleaner.

(C)

fixture

Step.1:

Remove Mounting Bracket (A) from Canopy

to install to electrical box.

Step.2:

Connect safety lanyard(B) to Mounting Bracket(A).Wire

fixture to wires in outlet box. Green wire is for ground.

Mark where anchors meet ceiling. Still with 3/8” drill bit.

Attach anchors. Caulk around back plate where it meets the

wall using outdoor silicone sealant

0UTLET BOX

(B)

Safety lanyard