Assembly Instruction

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Page 2 of (2)
1.Remove mounting bracket from fixture and install
to electrical box. Then wire fixture to wires in outlet
box. Copper wire is for Ground.
2.Attach back plate to mounting bracket and
tighten ball nuts so fixture meets wall.
3.Install 3 max 40W G9 bulb into socket.
4.Thread glass onto cup.
It can be installed up and down.
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner