(A)Canopy (B)Hanger Loop Ring (C)Chain link (D)Mounting bracket Nipple Locate all hardware & components before discarding packaging 1.) Step.1: Install mounting bracket(D) to outlet box. E G 2.) Step.2: Attach hanger loop(B) to nipple on mounting bracket(D). 3.) Step.3: Install top loop(F) onto fixture. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
(E)Chain (F)Top loop (G)Body Locate all hardware & components before discarding packaging E 4.) G Step.4: Remove ring from hanger loop(B) and open chain link(C) to attach appropriate amount of chain to loop to achieve desired mounting height. Make sure canopy is above hanger loop ring. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
(N)neutral (L)positive ground wire (green wire) 5.) Step.5: Thread wire through every 3rd loop of chain.Wire fixture to wires outlet box.Copper/silver wire is for Ground. B E 6.) Step.6: Slide canopy(A) up to ceiling and secure with hanger loop ring(B). G 7.) Step.7: Carefully unwrap fixture.Install max 60 watts medium base bulb(not included) into socket. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
