Installation Sheet

1. Pull the power supply wires out from the OUTLET BOX (A), and mount the
mounting bracket ( B ) to the OUTLET BOX (A), using MOUNTING
SCREWS (C)
2. Attach the power supply wires to the fixture load wires by connecting BLACK
to BLACK, and WHITE to WHITE . Attach the POWER SUPPLY GROUND
WIRE from the OUTLET BOX (A) and the FIXTURE GROUND WIRE from
the fixture to the GREEN GROUND SCREW (E) on the mounting bracket
( B ) or connect both wires together using the correct size of wire
connectors.
3. Placing the BASE (D) on the fixture over the O
UTLET BOX (A) and onto the
fixture mounting screws (G), and adjust the fixture mounting screws until they
protrude out from the BASE (D). Remove the BASE and secure the position of
the fixture mounting screws by tightening the HEX NUT (F) against the
mounting bracket ( B ) . Place the BASE (D) back onto the fixture mounting
screws and secure into place using the FINIAL (H) provided.
4. Throught the threaded tube (L) to the cap (J),then screw into the hexnut (I)
and tighten with the hexnut (K). Fit the tube (M) , the cap (J), the cap (N) onto
the threaded tube (L) then tighten with the hexnut (K). Fit the glass shade (O) ,
bracket (P) onto the threaded tube (L) then tighten with the hexnut (Q)and
finial (R).
Assembly Instruction For
20021/20031