Assembly Instruction

4.1)
4.2. )
Step4.2:Install top loop to center stem and attach
appropriate amount of chain to loop to achieve
desired mounting height. Thread wire through
every 3rd loop of chain.Remove ring from loop
and slide down chain. Place canopy onto chain
and let slide to top of fixture. Install nipple and
cross bar into top of chain loop. Wire fixture to
wires in outlet box. Copper wire is for Ground.
Pull canopy through screw ring up chain to
ceiling and tighten securely.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 3 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Semi-Flush Mount
Pendant
B
G
H
H
C
D
I
F
E
A
G
D
F
I
E
C
Step4.1:Wire fixture to wires in outlet box.
Copper wire is for Ground. Attach canopy
to mounting bracket and tighten with ball
nuts．