Assembly Instruction

2.)
1.)
3.)
Bracket Bracket Decorating part
Mounting Screws(4Pcs)
(A)
Chain (F)
(B) (C)
(G) Ball Nuts(2Pcs)(H) Loop(I)
Step1:Remove mounting bracket from
fixture and install to electrical box.
Step2:Rotate the bent tube to the suitable
position.Screw the Decorating part (C) into
the tube.
Step3:Place shade on the Nipple and tighten
with the Coupler.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Semi-Flush Mount
Pendant
Bent tube
B
B
A
G
D
E
G
H
G
H
C
Nipple
Shade
Canopy Loop(D) (E)
C
A
G
D
F
I
E
C
Coupler