Assembly Instruction

2.)

1.)

Bracket Ball Nuts(2Pcs) Decorating partMounting Screws(2Pcs)

(A) (B) (C) (D)

Step1:Remove mounting bracket from

fixture and install to electrical box.

Step2:Wire fixture to wires in outlet box.

Copper wire is for Ground. Attach canopy

to mounting bracket and tighten with ball

nuts.Place shade on the Base and tighten

with the Ball Screws.

Screw the Decorating

part

(D) into the Base and tighten.

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation

Locate all hardware & components before discarding packaging

Cleaning & Care:

Page 2 of (2)

Clean with soft cloth and a mild detergent.

Do not use abrasive cleaner.

Ball Screws(4Pcs)

(E)

A C