Assembly Instruction

2.)
1.)
(A)Bracket (B)Canopy (C)Ball Nuts
2Pcs
(E)Hex Nuts
3Pcs
(D)Mounting Screws
2Pcs
Step1:Remove mounting bracket from
fixture and install to electrical box.
A
A
D
C
F
I
G
E
E
H
J
K
L
B
D
B
C
Step2: Place shade on the Nipple and tighten
with the Coupler.Thread the nipple into
Hexagon connector, then secured by hex nut.
Put the metal washer and rubber washer on
the nipple,adjust them close to the glass
diffuser by the hex nut ,then put the glass
diffuser on the shade spider, and put
the Cap close to the glass diffuser, then
secured by hex nut and finial.
(F)Rods(1*6”+3*12”)*1
(G)Glass
(H)Nipple (I)Metal Washer (J)Rubber Washer (K) Cap (L)Finial
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Coupler
J
K
Nipple
Hexagon connector
L
I
G
E
E
Shade